Brake lines, hoses and hardware for 240Z, 260Z and 280Z cars.  Complete stainless steel brake line kits to "do-it-yourself" brake lines that can be formed to whatever shape and length desired.  

For brake hoses we have the option of stock replacement rubber hoses or braided stainless steel.  The braided stainless hoses offer a custom look, can handle higher pressures and can withstand more abuse.  Braided stainless lines are geared towards racing environments where the rubber hoses will give years of good service for a lower cost.  

We also offer brake lines in pre bent stainless steel or "do it yourself" mild steel.  The stainless steel kit replaces all of your factory brake lines with pre bent to factory spec lines that are ready to bolt on the car.  The "do it yourself"  brake lines are great if you have just have one or two lines to replace or are doing a custom brake install.  These lines are easily formed by hand without kinking or breaking and can be connected to each other to achieve almost any length.  

New OEM genuine Nissan brake hose/clutch hose line clip retainer. These will fit Datsun 1970-78 240Z, 260Z, 280Z...
New OEM Genuine Nissan brake hose/line clip. Will fit Datsun 1970-74 240Z and 260Z. These clips are found...
New brake line hose retainer clip for Datsun 240Z, 260Z and 280Z, 1970-78. May be in yellow zinc...
Datsun 240Z, 260Z & 280Z stainless rear brake lines. New pair of rear brake inlet lines in Stainless...
Reproduction fuel and brake line insulator set for Datsun 240Z, 1970-73. These mounts fit into the factory locations...
$49.00
Stock replacement rubber brake hose kit for Datsun 240Z, 260Z and 280Z, 1970-78. Includes two front hoses and...
$132.00
New fuel line and brake line bracket kit for Datsun 240Z 1970-72. Yellow-zinc plated with stainless steel screws....
New front brake line caliper transfer tubes for right and left sides front. Will fit Datsun 240Z and...
 These brake lines are 3/16" with 10mm metric fittings which will work with your Datsun metric fittings.  These...
New 240Z pre bent brake line kit.  Will fit 1969- to June of 1972 Datsun 240Z.  Pre bent...
Datsun 240Z, 260Z, 280Z stainless steel brake hoses. New set of front & rear performance brake hoses for...
$349.00
Datsun 280Z stainless steel brake lines. Stainless Steel 9-pc brake line kit for Datsun 280Z 1975 thru 1978....
New aftermarket braided hose in 5/16" I.D. This hose is not pre-formed but will work for the power...
This part will connect 3/16" steel brake lines with 10mm or 3/8" threaded fittings together. The 10mm will...
$9.00
New universal straight brake line that can be formed for the front brake caliper lines on Datsun 280Z,...
$10.99
New rear brake hydraulic rubber hose for Datsun 1970-78 240Z, 260Z and 280Z. Stock replacement brake hose. Check...
$109.99
Wilwood’s new Combination Proportioning Valve substantially simplifies mounting, plumbing, wiring and brake proportioning adjustments on vehicles with custom...
Pair of stainless steel brake hoses for use with our rear disc brake conversion kit. These have a...
$12.50
New front brake hose for Datsun 280ZX 1979-83 right or left side. This brake hose will fit drivers...
New Front brake hydraulic hose for Datsun 1970-78 240Z, 260Z and 280Z. This is a stock replacement front...
$349.00
Datsun 240Z stainless brake lines. Stainless Steel 9-pc brake line kit for Datsun 240Z with build date July/1972...
Datsun 240Z stainless rear brake lines set. New pair of rear brake inlet lines for Datsun 240Z 1970...
Braided stainless steel brake hose kit. Choose from Datsun 280ZX 79-81 or 82-83. Plastic clear coated stainless steel...
New stainless steel braided brake hose set for Datsun 240Z, 260Z and 280Z, 1970-78. Four hoses for the...
Datsun 240Z, 260Z, 280Z stainless steel brake hoses. New set of front & rear Goodridge performance brake hoses...
  Wilwood adjustable proportioning valve for use on disc brake upgrades. The new generation of adjustable proportioning valves...
New OEM Genuine Nissan hose clamp for the power brake booster hoses. These clamps will fit Datsun 240Z,...
New brake and fuel line holding bracket for Datsun 240Z, 260Z and 280Z, 1970-78. Yellow-zinc coated. These brackets...
New hydraulic hard lines for brakes or clutch. These lines are easily bendable by hand without kinking to...
T fitting for 3/16" brake lines.  Choose from metric or SAE threads.  M10 or 3/8" threads with inverted...
New right rear inner brake hose for Datsun 280ZX and 280ZX Turbo, 1979-1983. On the 280ZX there is...
New left rear inner brake hose for Datsun 280ZX and 280ZX Turbo, 1979-1983. The left rear has an...
$339.00
New stainless steel brake line kit for Datsun 510 2-door sedan, 1968-73. Pre bent to factory specs with...
$29.99
Datsun 240Z, 260Z, and 280Z brake hose. New OEM Genuine Nissan brake hose for the front or rear,...
Brake line adaptor fitting from 10mm metric inverted flare brake line to 1/8" pipe thread. This adaptor will...
$86.50
Braided stainless steel brake hose kit for Datsun 510, 1968-73. Includes 4 hoses. Braided steel with clear plastic...
Rubber brake hose kit for Datsun 510 Sedan or Wagon 1968-73. Includes front and rear rubber hoses.  Choose...
New OEM Nissan T fitting for M10-1.0 brake lines.  Brass fitting with 3 inverted flare fittings.   Our brake...
$10.99
Brake hsoe for the left rear of Datsun 510 sedan (not wagon) 1968-73.
New OEM Nissan T fitting for M10-1.0 brake lines. Two of the ports use inverted flare style bubbles...
$43.00
Heat shield sleeve with velcro for up to 1/2" tubing, 3 feet long. Thermaflect sleeve can be installed...
New reproduction braided cloth power brake vacuum hose for 1971-73 Datsun 240Z. This power brake hose goes from...
$12.00
Right rear brake hose for Datsun 510 (not wagon) 1968-73.
$139.99
Stainless steel braided brake hose kit for Datsun 510, 1968-73. Front and rear hoses with clips and washers....
$11.99
Front brake hose for right or left side on Datsun 510, 68-73.
$11.00
Brake caliper banjo bolt. This is a size M10 X 1.00 thread, 23mm length under the head. Includes...
$9.99
Rear brake hose for use with the 240SX rear disc conversion caliper.
New reproduciton power brake hose for Datsun 240Z series 1, 1970-1971. This hose is for the intake side....
1/4" hard line for brake aor fuel lines.  Choose from 10' copper/nickel or 25' galvenized steel.
$31.00
New stainless steel brake hard line for late 1977 and 1978 280Z.  This line from the front of...
$23.99
New brake hose with banjo fitting on one end. This hose is 22" long and the hose we...
Rear brake hose for Datsun 510 wagon 1968-73.  Single brake hose that runs from the body to the...
$192.00
New braided steel brake hose kit for Datsun 280ZX, 1982-83. Six piece kit. TUV approved.
$11.00
Brake caliper banjo bolt. This is a size M10 X 1.00 thread, 27mm length under the head. Includes...
Fitting commonly used on Wilwood brake calipers.  1/8"-27 NPT to 3/8"-24.
$4.69

Part #: 200-628

$3.59

Part #: 200-478

$1.50

Part #: 800-1360

$65.99

Part #: 800-350

$89.00

Part #: 800-1257

$49.00

Part #: 650-254

$132.00

Part #: 650-274

$99.99

Part #: 800-144

$349.00

Part #: 800-347

$12.99

Part #: 800-526-1

$9.00

Part #: 800-645

$10.99

Part #: 800-132

$109.99

Part #: 800-861

$64.99

Part #: 800-1099

$12.50

Part #: 800-698

$10.99

Part #: 800-131

$349.00

Part #: 800-346

$57.00

Part #: 800-349

$82.00

Part #: 800-1076

$139.00

Part #: 800-193

$4.99

Part #: 200-477 Brake

$12.99

Part #: 800-702

$12.00

Part #: 800-700

$339.00

Part #: 800-1589

$29.99

Part #: 200-757

$8.99

Part #: 800-783

$86.50

Part #: 800-1789

$41.00

Part #: 650-304

$19.99

Part #: 200-1108

$10.99

Part #: 800-131-1

$25.99

Part #: 200-1106

$43.00

Part #: 800-1498

$12.00

Part #: 800-130-1

$139.99

Part #: 800-1224

$11.99

Part #: 800-1170

$11.00

Part #: 800-185

$9.99

Part #: 800-1813

$31.00

Part #: 800-1081

$23.99

Part #: 800-577

$192.00

Part #: 800-1736

$11.00

Part #: 800-728

$3.49

Part #: 800-874

Showing: 1 -55 of 55
Spinner