New HKT made in japan temperature sensor. Will fit Datsun 240Z, 260Z and 280Z, 1970-78 . This sensor...
New OEM Genuine Nissan automatic transmission pan gasket. This gasket will fit Datsun 240Z, 260Z, and 280Z with...
$399.00
New set of driver and passenger seat covers for 240Z.  Seat covers are modeled after the original 240z...
Bullet connector with wire lead.  Choose from male or female connector. *See PT# 800-521 for terminal only.
New black acorn style lug nuts with thread size of M12-1.25.  Fits stock datsun thread size.   Sold individually....
Reproduction braided cloth style upper and lower radiator hoses for 1970-73 Datsun 240Z.
Aluminum coolant overflow tank.  Recovery Tank, 1-1/4 qt capacity, 5-1/2 in Tall, 4-1/2 in Wide, 3/8 in NPT Female...
New complete hood for Datsun 240Z, 260Z and 280Z.   Stock replacement with all bracing like original.  The 240Z...
New OEM Nissan wiring harness protection tape.  Abrasion resistant tape (self adhesive backing) with a thin layer of...
New spare tire well replacement sheet metal tub for 1970-76 Datsun 240Z, 260Z and 280Z.  High quality part...
$1.49
New OEM genuine Nissan screw size M5 x 10.  This screw is used to retain the inspection light...
Rubber valve stem to fit aftermarket alloy wheels, specifically the slotted type mags which were installed on 240Z,...
New OEM genuine Nissan shift fork pin clip for Datsun 240z, 1970- 8/71.
$9.00
New timing chain guide for the right side of the engine for 1970-74 240Z and 260Z. This guide...
New 40mm steel freeze plug for Datsun 240Z, 260Z, 280Z and 280ZX, 1970-83. The "L" series engines use...
New aluminum rear brake drum for Datsun 240Z, 260Z and 280Z, 1970-78. This drum is just like the...
HushMat Complete Vehicle* or Floor Pan* Insulation Kits (*Choose from 2 options). HushMats complete vehicle insulation kits serve...
New universal catch can kit for Datsun 240Z, 260Z, 280Z, 280ZX and 510 (engines with 1" engine block...
$3.59
New rubber plug ,  Can be used in various places on Z cars and 510.   Fits hole size...
New radiator cap for Datsun 240Z, 260Z, 280Z, 280ZX and 510 1970-83.  Stock replacement radiator cap. 19#.
New castle nut.  Choose from 10mm, 12mm or 14mm thread.  These castle nuts are used on tie rods...
New aluminum timing cover plate with gasket and stainless steel allen head bolts. Goes on the front of...
$135.00
New pair of plug in modules for switching to LED headlights on Datsun 240Z.   When converting to LED...
One new genuine OEM intake manifold coolant hose for Datsun 240Z and 260Z, 7/72 to 11/74. L24 and...
Exhaust pipe repair flex pipe.  These are 18" long and flexible so they are great for quick emergency...
New OEM Genuine Nissan pin switch for hand brake or rear hatch lights. Will fit Datsun 240Z and...
$13.99
New OEM genuine Nissan distributor weight. Manual lists for Datsun 70 to 8/71 240Z. Two required per distributor....
New adjustable suspension kit for Datsun 1970-78 240Z, 260Z, 280Z.   All components of this kit mount in the...
New OEM Nissan lower alternator mount.  Mounts the lower part of the alternator to the engine block.  Fits...
$16.99
New Nissan novelty lunch box with Z car image on one side and 510 on the other.  Measures...
New center cap emblem set of 4, for for early and late style hub caps.  Stock replacement, includes...
$29.99
Reproduction of the original wheel chock that came with the Datsun Z car.
Cloth braided cover rubber vacuum hose, 7.5mm or .30" I.D.,  12.5mm or .50" O.D.  Sold by the foot. ...
New black "muscle car" shift knob for Datsun 240Z, 260Z, 280Z and 510 with 8mm shifter threads.  This...
$89.00
New spare tire cover for the Datsun 240z, 260z and early 280z (’69-’76). The spare tire cover is...
$17.99
New 1" BSPT cylinder head plug for L6 engines.  This plug installs at the front of the head...
R180 differential pinion gear bearing for the outer (front) of the pinion gear. The R180 differential was the...
Engine lift hook for Datsun 240Z, 260Z, 280Z and 280ZX.   New engine lift hook in Stainless steel.  Works...
Sale
Door Handle Right or Left Chrome Outer OEM 240Z 260Z 280Z 510 *Blem
*New OEM Nissan chrome exterior door handle.  Includes the rubber hinge seals and the rod grommet. This door...
New OEM Nissan transmission "Plunger" for Datsun manual transmission.  Fits at the rear of the trans, part of...
New side marker mounting screw for Datsun 240Z, 260Z, 280Z and 510.  Zinc plated screw.  Will work on...
$1.99
OEM genuine Nissan M6 screw. Black finish, 20mm thread length. Phillips/with 10mm hex head.  Used in various places...
New OEM genuine Nissan pinion spacer for R180 differential.  Choose from different lengths.
$1.69
Hardened washer for the rear outer axle on Datsun 240Z, 260Z and 280Z, 1970-78.  Actual I.D.is about 21mm,...
New OEM Genuine Nissan transmission synchronizer for 5th gear only. This synchro will work in Datsun 240Z, 260Z,...
New made in Japan differential axle bearing for R180. This will fit right or left side. Choose from...
New "123Ignition" programable ignition distributor with cap, fits Datsun "Z" Cars. Comes with proper drive dog and pinch...
$3.99
New original style SU carburetor mounting nut set for 240Z and 260Z.  Includes JIS head (12mm wrench) nuts...
Front brake caliper replacement kit for Datsun 240Z, 260Z and 280Z, 1970-78.  These are stock replacement parts.  Kit...
Crankshaft balancer bolt that is 15mm longer than stock to be used with some aftermarket balancers, such as...
New universal catch can kit for Datsun 240Z, 260Z, 280Z, 28)ZX and 510.   Black aluminum can with (2)...
$54.99
Datsun 240Z, 260Z and 280Z 1970-78 clutch master cylinder, Made in Japan.  The clutch master cylinder is a...
New OEM Nissan vintage style key fob case for holding 3 keys.
$6.69
New 3D print seat adjuster handle knob for Datsun 240Z.  May fit 260Z as well, fits adjuster rod...
Sale
Datsun Wall Art Mount Key Holder Coat Hanger 240Z 260Z 280Z
Datsun S30 front end wall mount key holder.  Custom made raw metal 2-piece design. Customer can paint the...
New Mishimoto aluminum oil cap available in red or black.  Will fit all "L" series valve covers with...
New custom mount for adding a JBL Charge 3 speaker (3.25" diameter) to your car.   Mounts the speaker...
New reproduction tail light assembly set for Datsun 240Z, 1970-73. Excellent quality lenses which include chrome trim, gasket,...
DEI heat shield liner  48" X 21" kit.  This kit consists of a 48" X 21" sheet of dimpled...
Sale
Piston Set 2-Valve Relief Standard Set 240Z 260Z
New standard bore piston and ring set for Datsun 240Z and 260Z.  Flat top piston with 2-valve relief. ...
New rear hatch panel sheet metal.  Choose from Datsun 240Z series 1 (with vents) or 1971-1978 without vents. ...
$4.29
New "P-2" valve cover decal.  Decal has white back ground, approx 3/4" diameter.
Valve holder hose for putting air into the engine cylinder via the spark plug hole.  Simply screw this...
New OEM Genuine Nissan shifter pin for Datsun 240Z, 1970-august of 1971. Fits early 4-speed transmission.
$11.99

Part #: 800-1798

$399.00

Part #: 800-1733

$0.99

Part #: 800-893

$79.00

Part #: 800-2034

$399.00

Part #: 800-2350

$1.49

Part #: 200-1094

$2.00

Part #: 800-235

$9.00

Part #: 800-202

$2.00

Part #: 800-718

$3.59

Part #: 800-1553

$26.99

Part #: 800-2101

$135.00

Part #: 800-2401

$14.99

Part #: 800-1966

$13.99

Part #: 200-954

$829.00

Part #: 650-428

$49.99

Part #: 200-1186

$16.99

Part #: lunch

$29.99

Part #: 800-610X

$3.99

Part #: 800-1100X

$46.00

Part #: 800-2469

$89.00

Part #: 800-2445

$17.99

Part #: 800-1177

$39.99

Part #: 800-915

$19.99

Part #: 650-440

$0.45

Part #: 800-1527

$1.99

Part #: 200-1150

$1.69

Part #: 800-2210

$72.00

Part #: 200-828

$3.99

Part #: 650-432

$199.00

Part #: 650-366

$14.99

Part #: 800-1984

$49.99

Part #: 800-1932

$54.99

Part #: 800-1973

$19.99

Part #: 200-1190

$6.69

Part #: 800-982

$39.99$35.99

Part #: 800-2450

$74.99

Part #: 800-2505

Sale
$4.29

Part #: 800-2430

$14.50

Part #: 800-1920

Showing: 1409 -1472 of 1521
Spinner