Datsun 240Z 260Z 280Z
New EGR delete block off plate in Billet Aluminum with "Z" logo. This EGR plate will fit Datsun...
Stainless steel exhaust manifold stud kit for L series enginesin 8mm. Will fit Datsun 240Z, 260Z, 280Z, and...
Metric 22mm plug for the EGR pipe to the exhaust manifold or header on Datsun 280Z and 280ZX. ...
$6.00
New tail pipe and exhaust hanger for Datsun 240Z, 260Z 280Z and 280ZX. This hanger works great for...
$8.00
New exhaust pipe gasket for Datsun 240Z and 260Z years 1970-1974. This gasket fits on the exhaust manifold...
NEW exhaust manifold gasket for Datsun 280Z and 280ZX 1975-1983. This gasket goes in between the exhaust manifold...
New set of 11 copper exhuast manifold locking nuts with flange. These are 8mm theads with 13mm hex...
New OEM genuine Nissan exhaust manifold to exhaust pipe studs with stainless steel serrated locking nuts. Will fit...
New OEM genuine Nissan intake and exhaust manifold stud. Will fit 1970-83 Datsun 240Z, 260Z, 280Z, and 280ZX....
New OEM Genuine Nissan intake/exhaust manifold gasket for Datsun 240Z and 260Z 1970-74. L24 and L26 engines.
$18.50
New intake and exhaust manifold gasket for Datsun 240Z and 260Z, 1970-1974.
Set of 3 exhaust manifold to pipe 10mm studs with brass nuts. Will fit Datsun 280Z and 280ZX,...
$17.50
New OEM genuine Nissan exhaust pipe gasket for Datsun 240Z and 260Z, 1970-74. This gasket goes in between...
$43.00
New reproduction stainless steel heat shield for Datsun 240Z 1970-73. This heat shield is a copy of the...
Heatshield sleeve for fuel lines, coolant lines, brake lines, wires, anything that needs protected from heat. This sleeve...
$12.00
New set of 11 exhaust manifold copper locking nuts. These are 8mm thread with 12mm hex head. The...
New universal exhaust hanger bracket. This hanger measures about 9" overall length and can be shortened to about...
New OEM yoke washer for the manifold. This is the extra thick washer used on the intake and...
$7.50
New 18mm oxygen sensor plug with seal.
$305.00
New Pacesetter exhaust header for Datsun 240Z, 260Z and 280Z, 1970-76 with square port. Increase your engines performance...
Threaded metric pipe plug for use in plugging the AIR pipe holes on the exhaust manifold. This is...
$305.00
New Exhaust header 3-2-1 style for Datsun 280Z and 280ZX 1975-83. Black painted finish. Will fit L28 Nissan...
New exhaust header ceramic coated for Datsun 240Z, 260Z and 280Z 1970-76, with square port head. Header is...
$3.00
Exhaust manifold to pipe gasket for Datsun 510, 68-73. L16 and L18 engines.
$448.00
New Pacesetter ceramic coated header for Datsun 280Z and 280ZX L28 engines, round port, 1977-83. This header is...
$4.00
Weld on oxygen sensor fitting. M18-1.5 threads and 1/2" long.
$59.00
New EGR valve for Datsun 280Z and 280ZX, 1975-83, non turbo. Includes gasket.
$129.00
Stock replacement exhaust system for Datsun 280Z, 1975-78. This pipe is designed to bolt up to the 2-bolt...
$6.00
Turbo flange gasket for stock T3 style turbo. Will fit Datsun 280ZX Turbo, 1981-83.
Sale
Muffler Rear JDM Stainless Steel Zstory 240Z 260Z 280Z Clearance
New stainless steel Zstory rear JDM muffler. 2.5" inlet with twin 2" outlets. This muffler is a direct...
$169.00
New aftermarket stock replacement exhaust pipe for Datsun 280ZX 1982-83, non turbo. This is a cat-back system.
Catalytic converter to front pipe gasket for Datsun 280Z and 280ZX, 1975-83.
New Zstory stainless steel street/sport header for square ports (can be machined to fit round ports). 15mm flange...
$131.50
Exhuast downpipe for Datsun 280ZX, 1980-83 (non turbo). This pipe attaches to the exhaust manifold and runs to...
$100.00
Remanufactured smog pump for Datsun 240Z and 260Z, 1970-74.
New Zstory stainless steel exhaust system for Datsun 240Z 260Z 280Z 1970-78. Full 2.5" stainless exhaust system with...
$4.50
New exhaust pipe gasket for converter to intermediate pipe on Datsun 280ZX, 1982-83.
New mild steel exhaust pipe flange for Datsun 240Z, 260Z and 280Z.  This flange is for making a...
Anti seize thread lube.  Available in 1oz size (aluminum) for up to 1800 degrees F and .5oz size...
$20.50
OEM genuine Nissan turbo flange gasket. This gasket will fit T3 style turbo's on Datsun 280ZX turbo, 1981-83....
These high heat cloth boots will work on any engine where the exhuast is touching your plug wires....
DEI floor heat and sound barrier.  Protects uo to 1750 degrees.  Comes in a 24" X 21"  or...
Exhaust pipe repair flex pipe.  These are 18" long and flexible so they are great for quick emergency...
$40.00
New stainless steel T3 turbo flange. .50" thick. Use for custom turbo exhaust header. Matches T3 and T3/T4...
Used thick manifold washer for L series engines. Will fit Datsun 240Z, 260Z, 280Z and 280ZX, 1970-83. Used...
New OEM stud for Datsun 280ZX turbo exhaust.  This stud is located in the downpipe, 3 per car. ...
Stainless steel 12" cable tie for use on high heat applications such as header wrap.  Sold individually.
$69.00
Stainless steel V band clamp for 3" pipe.
$42.00
No weld oxygen sensor bung mount. This clamp will fit 2.25" to 2.5" O.D. exhaust pipe. Allows for...
$20.50

Part #: 650-047

$23.50

Part #: 650-146

$6.00

Part #: 800-927

$8.00

Part #: 800-101

$6.00

Part #: 800-243

$14.50

Part #: 650-073

$16.50

Part #: 200-517

$2.29

Part #: 200-784

$34.99

Part #: 200-865

$18.50

Part #: 800-057

$13.00

Part #: 800-257

$17.50

Part #: 200-601

$43.00

Part #: 650-225H

$12.00

Part #: 650-072

$9.00

Part #: 800-926

$3.00

Part #: 200-846

$7.50

Part #: 800-863

$305.00

Part #: 800-497F

$3.50

Part #: 800-1788

$305.00

Part #: 800-496F

$3.00

Part #: 800-1141

$448.00

Part #: 800-495F

$4.00

Part #: 800-1262

$59.00

Part #: 800-803

$129.00

Part #: 800-1101G

$6.00

Part #: 800-1287

$169.00

Part #: 800-2253

$4.00

Part #: 800-1950

$131.50

Part #: 800-1425F

$100.00

Part #: 800-918

$4.50

Part #: 800-1886

$20.50

Part #: 200-919

$13.00

Part #: 800-1966

$40.00

Part #: 800-1760

$2.99

Part #: 200-1066

$0.79

Part #: 800-2179

$69.00

Part #: 800-2147

$42.00

Part #: 800-1346

Showing: 1 -49 of 49
Spinner