Tools and shop supplies for restoration of your Datsun Z car.  Take a look at our rust prevention and repair products for Datsun 240Z, 260Z and 280Z.  
Window crank removal tool. This window handle tool will work on Datsun 240Z, 260Z, 280Z and 280ZX 1970-83....
$81.99
Custom tool for removal of the spindle pin on the rear suspension. The spindle pin is located on...
Tool for holding the timing chain in place while the cylinder head is being installed on "L" series...
$46.00
WEBER STE SK TOOL. SYNCHROMETER MADE IN GERMANY. USED TO SYNCHRONIZE MULTIPLE CARBURETOR SYSTEMS .CAN ALSO BE USED...
Z car depot has found this flexible adhesive to be the best/ most affective adhesive on the market....
Plastigage clearance indicator used for checking engine bearing clearances. Simply place on the rod or main bearing, torque...
Rope hand tool for installing windshield and hatch glass on Datsun 240Z, 260Z and 280Z, 1970-78. This tool...
FREE.... Zcardepot.com window or bumper sticker. 5" long.
Chrome paint trim pen. Avalaible with fine 1mm tip or wider 4mm tip. These pens are great for...
Plug for the rear transmission seal so that it will not leak fluid when being removed or stored....
Custom wrench for the gland nut on the strut assembly found on Datsun 240Z, 260z and 280Z. This...
$91.00
Valve spring compressor tool for removing valve springs on "L" series Nissan OHC engines. Will work on 4...
$15.99
Red Line synthetic GL-4 manual transmission oil. One Quart. Safe for brass synchros, as it lacks the reactive...
$21.50
Haynes service repair manual for Datsun 280ZX, 1979-83.  Covers all aspects of the car with detailed pictures and...
75W90 GL-5 Gear Oil Most popular Red Line gear oil, with thousands of applications for passenger cars, light...
$2.00
Plastic paddle stick for installing trim. This tool has many uses in restortion as it will not dent...
$6.99
Carburetor cleaning brush and rod kit.  Includes pipe cleaner type brushes and small rods.  Great for cleaning SU...
Socket tool for removing the transmission plug on Datsun transmissions.  Uses a 1/2" drive ratchet to remove the...
$35.50
Thread repair die for the outer axles on Datsun 240Z, 260Z and 280Z, 1970-78. It is common when...
Concise text leads you through each engine rebuilding step for all Nissan/Datsun 4- and 6-cylinder L-series engines. Gives...
$17.50
Pair of jack stand pads made from polyurethane. These slip on the top of most all 1.5 Ton...
New pair of front brake speed bleeder screws with rubber caps. These bleeders will fit Datsun 1970-78 240Z,...
New clutch pilot bushing removal tool for Datsun 240Z, 260Z, 280Z, 280ZX 1970-83. This tool requires a grease...
ARP ultra torque assembly lube. ARP lube should be used on ARP fasteners for correct torque readings.   Choose...
New tapered piston ring compressor in custom sizes for your Datsun "L" series engine build.  This tool can be...
$26.50
New wheel stud installation tool. Keep from damaging your new studs when installing them. Includes use instructions.
Datsun 240Z, 260Z 280Z speed bleeders. New pair of rear drum brake speed bleeder screws for Datsun 1970-78...
$30.50
Covers tuning tips and techniques for Su Carburetors as well as all Su fuel pumps for numerous classic...
Rubber toughened adhesive and accelerator for attaching rubber parts to the car with a quick cure time.   Place...
Permatex high temp thread sealant liquid.  Withstands temps up to 400 F.  .20 OZ.
$18.99
New 11 oz Seam Sealer in black. Great for sealing up your car and finishing off sheet metal...
Spot weld cutter for separating sheet metal that was spot welded from the factory. This tool will allow...
Permatex ultra copper gasket maker. Withstands temperatures up to 700 F. Ideal for exhaust gasket repair.   We have...
Quick Dry rubberized Undercoat is a large 11.75 oz aerosol can that covers good & dries quickly. Two...
POR 15 gloss black rust preventative paint in a 4 oz size. POR is applied directly onto rusted...
Stencil for the restoration of the mustache bar for R180 and R200 bars. Vinyl sticker part numbers with...
$5.99
Driven engine rebuild assembly grease. 1 oz tube. * Provides proven extreme pressure protection for heavily loaded parts...
$29.50
Window trim installation tool for windshield and back glass.
Threadlocker in 6ml tubes for easy application. Available in medium strength (blue) and high strength (red). Medium strength...
$32.50
Weber carburetor sync tool for 32/36 DGEV and 38 DGES carbs. Allows the sync tool to seal up...
$4.50
Dielectric tune-up grease. Protects electrical connections from corrosion. Great for light bulbs and spark plug boots.
New 10mm hex socket with 3/8" drive. This is the correct size tool for the cylinder head bolts...
NEW Panel bond adhesive for sheet metal repairs. Use this 2-part epoxy instead of welding on your Datsun...
$15.50
Acry Solvent 17oz aerosol can. Used for cleaning out the corrosion protection wand (sold separately), also great for...
Driven’s Storage Defender Gasoline fuel additive is to be used when vehicles are stored to prevent the damaging...
Anti seize thread lube.  Available in 1oz size (aluminum) for up to 1800 degrees F and .5oz size...
New radiator cap with sacrificial anode.  Choose from 13# or 16# cap.  Will fit datsun 240Z, 260Z, 280Z,...
$21.50
Hose cutting tool for rubber, silicone and PVC hose up to 3" diameter. Works great on radiator hose...
Perfect for transmissions, differentials, gear cases, crankcases, etc.  Great for filling or extracting, works like a giant syringe. ...
Driven Racing Oil Carb Defender fuel additive utilizes special corrosion inhibitors to prevent costly repairs and poor performance...
$9.00
One 10 foot roll of self-vulcanizing electrical tape is a non-sticky silicone tape that will bond to itself...
Redline Friction Modifier & Break-In Additive - 4 oz. Redline Friction Modifier is highly recommended for Limited Slip...
Piston notching tools custom made for "L" series Datsun engines. These tools mount up in the cylinder head...
$7.99
Blue Magic metal polish cream. Works great on alloys, brass, stainless, aluminum, copper, plastic, etc. Simply rub on...
SD-20 is a water based oil and grease remover that is great for cleaning engine parts after the...
$9.89
M10-1.25 thread die.  Made in USA.
New triple gauge set with mounting bracket and accessories.  Includes 2 5/8" gauges.  Oil Pressure (mechanical), water temp...
$13.50
Precison dial tire pressure gauge, 0-100 PSI.
$19.50
Dual USB charge ports with voltage display.  Plugs into 12V socket.
ARP thread chaser taps for cleaning threads.  These cleaners are great for use on engine rebuilds for cleaning...
DEI floor heat and sound barrier.  Protects uo to 1750 degrees.  Comes in a 24" X 21"  or...
$15.50
Electrical relay removal pliers.  Allows the removal of relays without the risk of damaging them.
$142.00
New tool kit for removing suspension components including ball joint, tie rods and stabilizer links.  These tools work...
$19.99
Metric thread cleaning tool for use on bolts.  This "file" will clean up damaged threads on bolts with...
$9.00

Part #: 800-325

$81.99

Part #: 800-1042

$17.99

Part #: 800-096

$46.00

Part #: 800-468

$19.99

Part #: 650-189

$28.50

Part #: 800-661

$14.89

Part #: 800-1733

$5.00

Part #: 800-1561

$91.00

Part #: 800-1735

$15.99

Part #: 800-907

$21.50

Part #: 800-1848

$15.00

Part #: 800-908

$2.00

Part #: 800-1519

$6.99

Part #: 800-342

$35.50

Part #: 800-1445

$27.99

Part #: 800-1827

$17.50

Part #: 800-462

$20.50

Part #: 800-123

$18.50

Part #: 800-081

$26.50

Part #: 800-363

$20.50

Part #: 800-122

$30.50

Part #: 800-1080

$4.99

Part #: 800-1842

$18.99

Part #: 800-236

$20.50

Part #: 800-1611-1612-1611= Tool

$7.89

Part #: 800-1627

$19.50

Part #: 800-273

$14.50

Part #: 800-631

$5.99

Part #: 800-1772

$29.50

Part #: 800-1440

$32.50

Part #: 800-1817

$4.50

Part #: 800-1475

$6.99

Part #: 800-828

$71.00

Part #: 800-238

$15.50

Part #: 800-274

$10.99

Part #: 800-1786

$21.50

Part #: 800-968

$17.99

Part #: 800-1354

$10.59

Part #: 800-1771

$9.00

Part #: 800-1631

$8.50

Part #: 800-906

Out of stock

Part #: 800-1580/1581-1580= Intake 44mm

$7.99

Part #: 800-1474

$5.99

Part #: 800-087

$9.89

Part #: 800-647

$59.00

Part #: 800-2319

$13.50

Part #: 800-609

$19.50

Part #: 800-1983

$15.50

Part #: 800-2169

$142.00

Part #: 800-1980

$19.99

Part #: 800-1651

Showing: 1 -64 of 64
Spinner