Datsun 240Z 260Z 280Z
Driven engine rebuild assembly grease or Gel.  The gel is designed as a no drip formula. * Provides...
Cometic MLS head gasket, 89mm for L28.   Choose from .040" or .045" thickness.   Cometic MLS (multi-layer-steel) head...
New bronze intake or exhaust valve guide for Datsun 240Z, 260Z, 280Z and 280ZX, 1970-83.   Fits all "L"...
New set of 6 pistons with rings and pins for L28, L28E and L28ET engines 1975-83 Datsun 280Z...
Engine main bearing set. Will fit Datsun 510, 1968-1973. L16 and L18 engines. Choose from Std, .010" or...
New set of 6 pistons with rings and pins for L28 engines 1981-83 Datsun 280ZX. These pistons will...
$11.99
New exhaust valve for Datsun 260Z, 280Z and 280ZX 1974-1980. Stock replacement. Specs: Nitride Coated; 1 Groove; 35.1mm...
New stock replacement intake and exhaust valve set for 1981-1983 Datsun 280ZX and Turbo engine. 35mm and 44mm....
$14.99
One new stock replacement exhaust valve for 1970-1973 Datsun 240Z, L24 engines. 33mm head diameter.
$17.99
New OEM Genuine Nissan crankcase vent elbow for valve cover. Will fit Datsun 240Z, 260Z, 280Z and 280ZX,...
Remflex Intake/exhaust manifold gasket set for Datsun "L" series four cylinder engines, L16, L18 and L20B.  Choose from...
New bronze oil pump drive gear for Datsun "L" series engines.  The bronze gear is for use in...
$31.99
New upper and lower timing chain guides for Datsun 280Z and 280ZX, 1975-1983. *See PT# 800-213 for a...
New spark plug for Datsun 510, 1968-73. Four plugs required to replace all.  Choose from NGK or Denso...
$12.99
New stock replacement intake valve for 1975-80 Datsun 280Z and 280ZX. 44mm head size.
New standard bore piston set for Datsun 240Z and 260Z.  Flat top piston with 2-valve relief.  1.515 compression...
Permatex threadlocker in 6ml tubes for easy application. Available in medium strength (blue) and high strength (red). Medium...
New Genuine Nissan rod bearings in standard size. These bearings will fit Datsun 240Z, 260Z, 280Z, and 280ZX,...
New OEM genuine Nissan valve guide snap ring. Wil fit guides on Datsun "L" series engines 1968-83.  
$8.00
New engine oil cap for Datsun 240Z, 260Z, 280Z, 280ZX 1970-83. Also fits 510 1970-73.  Fits L24-L26-L28 engines....
$11.49
Driven racing oils HR5 10W-40 conventional oil. HR5 is an advanced petroleum engine oil that has been formulated...
Comp Cams 280S camshaft for Datsun 4-cylinder L16, L18 and L20B engines. Good street/race cam. Upgrade over stock. ...
Isky racing camshaft for Datsun L24, L26 and L28 engines. Two versions available for street and track use....
$529.00
Datsun 280ZX Turbo oil pump drive. New Genuine Nissan OEM oil pump spindle drive shaft for Datsun 280ZX...
New OEM Nissan M6 X 15 bolt with washer.  This bolt will work for the timing chain guide...
New OEM genuine Nissan 35mm freeze plug. This plug will fit the rear of cylinder head on 6-cylinder...
New piston ring set from TPR or NPR Co. Japan.  Available for L24, L26 and L28 (75-80) engines...
$19.99
Cylinder head shim kit for Datsun L16, L18 and L20B 4-cylinder engines, 1968-78. These shims are used under...
Standard size crankshaft main bearing set for Datsun L20B 4-cyl engines.   Choose from standard or .25mm undersize.
New OEM genuine Nissan cylinder head bolt for Datsun 1200 A12 engines, 1970-73. The A12 used 9 short...
$25.50
New upper and lower timing chain guides for 1970-74 Datsun 240Z and 260Z. Timing chian guides for L24...
Sale
Engine Gasket Set Complete Sanwa Made in Japan 280Z 280ZX
New Sanwa (made in japan) engine gasket set for Datsun 280Z/280ZX.  Includes alll gaskets shown in the picture. ...
New OEM genuine Nissan connecting rod bolt with nut for "late" engines. This rod bolt will fit Datsun...
Engine lift hook for Datsun 240Z, 260Z, 280Z and 280ZX.   New engine lift hook in Stainless steel.  Works...
$11.99
New set of 8 intake and exhaust valve seals for Datsun 510 and 620, 4-cyl "L" series.  These...
Sanwa made in Japan complete gasket set for 1975-83 Datsun 280Z and 280ZX.  Includes everything shown in the...
$12.99
New OEM genuine Nissan timing chain oiler jet for Datsun "L" series 4-cylinder engines. Will fit L16, L18...
New OEM Nissan M6 X 35 bolt with washer.  This bolt will work for the timing chain tensioner...
New stock replacement intake or exhaust valve for 1979-83 Datsun 280ZX L28E & L28ET engines.  Sold individually.  Choose...
New timing gear to camshaft washer for L28 engines. This washer will fit all L series engines but...
New Asahi made in Japan water pump with cast impeller. This pump will fit L-series engines found in...
New 35mm steel freeze plug for Datsun 240Z, 260Z, 280Z, and 280ZX, 1970-83. The "L" series engines use...
Kit for installing the harmonic balancer on any "L" series Nissan engine.  The balancer should slide on the...
New set of piston rings for Datsun L18 and L20B engines. 85mm bore size. Enough rings for all...
$3.69
New brass freeze plug for Nissan L24, L26, L28, and L28E engines. This expansion plug is located at...
Fits 1968-1983 Datsun 240Z, 260Z, 280Z, 280ZX and 510 Black: Material: 6061 Aluminum Powerful neodymium magnet Reduces metal...
$129.00
New stock replacement intake & exhaust valve set for 1974 Datsun 260Z with L26 engine. 42mm intake and...
$129.99
New ARP main stud kit for 2-bolt mains. Will fit Datsun 4-cylinder L16, L18 and L20B engines ,...
Crankshaft balancer bolt that is 15mm longer than stock to be used with some aftermarket balancers, such as...
New Made in Japan O.S.K. timing chain kit for Datsun L16 and L18 4-cylinder engines.   Includes timing gears,...
Isky L480 or L490 camshaft for Datsun 4-cylinder L16, L18 and L20B engines. L480: Good street/race cam. Upgrade...
New valve spring for Datsun 240Z, 260Z, 280Z, 280ZX and 510 1968-1983. Fits all "L" series 4 and...
$169.00
ARP head stud kit for Datsun L20B 4-cylinder engines, 1974-1981.
Camshaft mount shim set for Datsun 240Z, 260Z, 280Z and 280ZX, 1970-1983. These shims are .075" thickness. Cam...
New Genuine Nissan engine oil cap for Datsun 510 (1968-early 1970) and Roadster 1965-70 (R16) (U20).  This is...
Gear for the crankshaft that runs the timing chain. This gear will fit all "L" series four and...
New ARP racing cylinder head bolt set for Datsun "L" series 4-cylinder engines. This set of 10 bolts...
New Fel Pro head gasket kit for Datsun 510 and 620, L16 L18 and L20B engines. Years 1968-79. ...
$11.00
OEM genuine Nissan banjo bolt and sealing washers for Datsun 280ZX turbo. This banjo bolt mounts in the...
$15.99
Redline engine oil break in additive with Zinc and Phosphorous. Fully-synthetic ester formula for passenger cars, light trucks,...
New set of standard or .020" oversize size piston rings for Datsun L16 engines. 83mm bore size. Enough...
New OEM Nissan timing indicator tab for late L20B 4-cylinder engines and A10 engines.
$20.99
New Genuine NIssan engine oil cap for Datsun 240Z, 260Z, 280Z, 280ZX 1970-83. Also fits 510 1970-73.  Fits...
Reproduction silicone T hose for the intake vacuum lines and Datsun 280ZX, 1980-1983 (non turbo). This hose mounts...
$9.49

Part #: 800-1525

$479.00

Part #: 800-293-.030

Out of stock

Part #: 800-1010

$11.99

Part #: 800-070

$119.00

Part #: 800-114-115

$14.99

Part #: 800-073

$17.99

Part #: 200-641

$31.99

Part #: 800-203-212

$12.99

Part #: 800-071

$19.99

Part #: 200-840

$1.65

Part #: 200-953

$8.00

Part #: 800-111

$11.49

Part #: 800-1770

$529.00

Part #: 200-662

$3.50

Part #: 200-974

$19.99

Part #: 800-1250

$25.50

Part #: 800-202-203

$11.99

Part #: 200-575-576

$31.99

Part #: 650-440

$11.99

Part #: 800-470

$12.99

Part #: 200-1003

$2.29

Part #: 200-1072

$6.99

Part #: 800-1716-1

$1.50

Part #: 800-010

$17.99

Part #: 650-344

$55.00

Part #: 800-1166-Standard

$3.69

Part #: 800-641

$129.00

Part #: 800-070-074

$129.99

Part #: 800-1239

$17.99

Part #: 800-1984

$169.00

Part #: 800-1237

$139.99

Part #: 200-613

$14.00

Part #: 800-1159

$11.00

Part #: 650-300

$15.99

Part #: 800-1079

$57.00

Part #: 800-358

$6.99

Part #: 200-1172

$20.99

Part #: 200-1159

Showing: 129 -192 of 248
Spinner