Datsun 240Z, 260Z and 280Z engine rebuild parts.  Any item that is needed under the hood can be found here.  Stock replacement and original restoration parts for your Z car as well as performance and upgrades.   We have many OEM Genuine Nissan as well as aftermarket and custom made in the USA engine parts.  Our OEM parts will have "OEM" in the title.  All of our custom and billet parts are made in the USA.  We also carry a large selction of used parts which are not all on the website, so please contact us for unusual parts that are not listed.  
New ATI racing damper for your L6 or L4 engine (choose in drop down). Factory dampers and non-dampened...
Isky L480 camshaft for Datsun 4-cylinder L16, L18 and L20B engines. Good street/race cam. Upgrade over stock.   .480"...
New OEM crankshaft ball hole plug for Datsun 240Z, 260Z and 280Z.   6.2mm diameter.
$10.50
New stock replacement exhaust valve for 1979-83 Datsun 280ZX L28E & L28ET engines.  Sold individually.
UNI brand performance foam air filter. This filter fits our SU carburetor air filter assemblies. Filter is approx....
Polyurethane transmission mount for Chevy automatic and manual transmissions. This mount will fit GM transmissions automatic and manual....
New metric high grade torque converter bolt for LS based V8 engines including Corvette and Camaro. Attaches the...
New OEM genuine Nissan timing chain guide for L28 engines right side. Will fit Datsun 280Z and 280ZX,...
$9.00
New timing chain guide for the right side of the engine for 1970-74 240Z and 260Z. This guide...
$15.50
Datsun 280Z & 280ZX timing chain guide. New timing chain guide for Datsun 280Z-280ZX 1975-83. This guide is...
Two New Power Grip custom radiator hose clamps for Datsun 240Z, 260Z, 280Z and 280ZX 1970-83. These hose...
New piston set for Nissan L20B 4-cylinder engines. Includes pistons, Rings and pins. Dished top. Standard and .020...
Stainless steel screw set for mounting the TPS and IAC to the throttle body on LS style engines....
$51.00
LS2/LS7 style ignition coil relocation harnesses plug directly into the stock engine harness or TSP's extension cables. They...
$49.00
Intake manifold flange to fit Datsun 4-cylinder L16, L18 and L20B engines. Use these flanges for making custom...
$13.99
New OEM genuine Nissan distributor weight. Manual lists for Datsun 70 to 8/71 240Z. Two required per distributor....
New OEM genuine Nissan crank case vent hose for 1976-1980 Datsun 280Z and ZX. Should fit late 1975...
Crankshaft for 1974-83 Datsun 260Z, 280Z and 280ZX engines.  Factory made in japan. Ready to install. Mains have...
$44.99
New OEM genuine Nissan motor mount for Datsun 1600 and 2000 Roadster, 1965-70.
New OEM genuine Nissan head inspection plate.  Will fit all "L" series engines at the front of the...
$279.00
New stainless steel header for Datsun 280Z and 280ZX 1977-83.  Header has 1 5/8" round ports and a...
ARP thread chaser taps for cleaning threads.  These cleaners are great for use on engine rebuilds for cleaning...
New air cleaner to carburetor gasket for Datsun SU 1.5" carburetor like used on Datsun 510 with dual...
New OEM Genuine Nissan thermostat housing bolt.  These bolts will fit 70-73 Datsun 240Z.  Choose from long or...
Perfect for performance street vehicles, classic cars, imports, and competition/race engines requiring a 10W-30 viscosity. GP-1 is compatible...
One inch to 5/8" plastic adapter fitting.  This can be used on the PCV block vent tube to...
$189.00
New stock replacement piston set for Datsun 280ZX 1981-83.  Standard bore size. Standard dish top.  Includes wrist pins. ...
OEM genuine Nissan banjo bolt for the turbo oiling. Will fit Datsun 280ZX turbo, 1981-83. Size M12.
New OEM Genuine Nissan radiator cap. This radiator cap will fit Datsun 240Z, 260Z, and 280Z, 1970-1978 and...
$8.00
New OEM genuine Nissan oil filter for Datsun 2000 Roadster U20 and H20 engine.
$9.00
New K&N Performance oil filter for LS V8 engines 1997-2007. 5.3L and 5.7L.
$12.00
New set of grade 12.9 allen head header bolts for GM LS Gen III V8 engines. Fits LS1/LS2/LS6/LS3,...
$22.50
K&N vent breather with 5/16" inlet. Breather measures 1.5" tall and 1.5" diameter.
New 40mm steel freeze plug for Datsun 240Z, 260Z, 280Z and 280ZX, 1970-83. The "L" series engines use...
$8.69
Driven racing oils HR5 10W-40 conventional oil. HR5 is an advanced petroleum engine oil that has been formulated...
Crankshaft kit for 1970 1971 1972 1973 Datsun 240Z, L24 engines. Crank has been turned .010" (.25mm) rods...
New OEM Nissan air cleaner to carburetor gasket for 1970 to 6/72 Datsun 240Z with SU type carbs....
$26.50
New cam gear for all "L" series Nissan engines 1968-1983.
$49.00
ARP rod bolt set for Datsun 510, 1968-73, L16 engine.
$295.00
Datsun 240Z & 260Z K&N air filters. New K&N performance air filter set for late 1973 & 1974...
K&N custom air filter set for Datsun 240Z, 1970-72 round top SU carburetors.  Kit includes custom billet aluminum...
K&N custom air filter set for Datsun 510 dual 1.5" SU carburetors.  Kit includes our custom plastic velocity...
K&N custom air filter set for Datsun 240Z, 1970-72 round top SU carburetors.  Kit includes our custom plastic...
Purepower lifetime performance oil filter.  Cleanable, reusable oil filter for your Datsun that provides superior filtration to paper...
$30.50
Standard size dish piston for Datsun L20B 4-cylinder engines. Will fit Datsun 620 truck 1975-79. Includes pin, no...
New/Reman distributor for Datsun L20B 1979 620 truck. What you see in the picture is what you get...
Remanufactured electronic distributor for Datsun 280Z, 1975-78. Includes vacuum pod and pickup assembly. These are reman distributors, we...
$79.99
Oil pickup tube for use with the high capacity Moroso oil pan on L6 engines.  Will not fit...
NDC Rod bearing set for Datsun 510 L16, L18 and L20B engines, 1968-1973.  Made in Japan, standard size....
New OEM Nissan water pump for Datsun 240Z, 260Z, 280Z and 280ZX, 1970-83.  Includes gasket and fan studs.  ...
$8.99
10W-40 Driven Racing Oil BR break-in motor oil is used to break-in and dyno all engines. Petroleum oil...
$19.99
Metric thread cleaning tool for use on bolts.  This "file" will clean up damaged threads on bolts with...
New chain tensioner for Datsun "L" series 4-cylinder engines. Will fit L13, L16, L18 and L20B engines.   Choose...
$46.00
Aluminum L28 throttle body flange. For making cutom intake manifolds using a stock L28 throttle body. Measures 3.2"...
Prestolok 1/4" connector. This fitting will connect 1/4" plastic tubing and convert to 1/4" or 1/8" NPT female...
$7.00
Prestolok 1/4" hose "Y" adaptor connector.
$7.00
K&N oil filter for 2007-17 Chevy V8 5.3L and 6.2L found in Camaro, Corvette and Truck/SUV.
$11.00
Intake manifold bolt kit for LS V8 engines with truck intake manifold.
$101.00
New blower motor for Datsun 510, 1968-73.
$14.50
GM MAP sensor connector. Three round pin style. Works with popular aftermarket style 3 bar sensors.
$6.00
New OEM Nissan engine oil jet. This jet is for the L28ET 280ZX 82-83 turbo block.
4AN male to female fitting with 1/8 inch NPT port for a sensor.   Choose from single or dual...
Reducer from 1/8 male NPT to 1/2 female NPT. Pipe thread.
$299.00

Part #: 800-1123

$2.99

Part #: 200-571

$10.50

Part #: 800-114

Out of stock

Part #: 800-1369

$35.99

Part #: 800-362

$3.00

Part #: 800-1005

$9.00

Part #: 800-202

$15.50

Part #: 800-212

$13.00

Part #: 800-157

$152.00

Part #: 800-1776

$3.00

Part #: 650-287

$51.00

Part #: 800-1352

$49.00

Part #: 800-1363

$13.99

Part #: 200-954

Out of stock

Part #: 200-687

Out of stock

Part #: 800-020

$44.99

Part #: 200-1020

$5.99

Part #: 200-439

$279.00

Part #: 800-1509

$3.99

Part #: 800-2301

$8.29

Part #: 800-821

$2.99

Part #: 800-901

$189.00

Part #: 800-2103

Out of stock

Part #: 200-689

$8.00

Part #: 200-1036

$9.00

Part #: 800-461

$12.00

Part #: 650-057

$22.50

Part #: 800-509

$2.00

Part #: 800-718

$8.69

Part #: 800-1770

Out of stock

Part #: 800-021

$26.50

Part #: 800-1160

$49.00

Part #: 800-1240

$295.00

Part #: 800-113

$189.00

Part #: 650-122

$159.00

Part #: 650-366

$249.00

Part #: 800-721

$30.50

Part #: 800-1572

Out of stock

Part #: 800-1569

$79.99

Part #: 800-1787

$19.99

Part #: 800-227

$199.00

Part #: 200-663

$8.99

Part #: 800-931X

$19.99

Part #: 800-1651

$46.00

Part #: 800-1362

$10.00

Part #: 800-1659/1669-1659= 1/4 NPT

$7.00

Part #: 800-1683

$7.00

Part #: 800-1236

$11.00

Part #: 650-015

$101.00

Part #: 800-1797

$14.50

Part #: 800-1650

$6.00

Part #: 200-1040

$10.00

Part #: 800-1715

Showing: 577 -639 of 639
Spinner