Datsun 280Z 280ZX
$7.50
New 18mm oxygen sensor plug with seal.
$34.50
New GM throttle position sensor for use with our FAST fuel injection conversion system. Produces a 0-5V signal...
6 AN male O-ring adaptor fitting to 5/16" or 3/8" hose barb. Black color. This fitting will work...
Stainless steel lined hose clamp for the air intake to the air flow meter on Datsun 280Z and...
$109.00
Remote idle air control valve for use with EFI. New billet aluminum body with air filter and Delphi...
Heat shield wrap available in 1.25" and .75" I.D.  Sold in one or two foot lengths.  This reflective...
Conversion bracket for using a GM TPS sensor (0-5V) on the stock fuel injection throttle body of Datsun...
$2.89
One new fuel injector seal, large seal. This seal will fit Datsun 280z and 280ZX, 1975-83. This is...
Metric phillips head screw in stainless steel for use on the throttle linkage rod above the intake manifold....
New aftermarket inline fuel pressure damper for 280Z and 280ZX EFI fuel injection systems.  The original damper is...
New air flow meter/throttle body hose clamps for 1975-83 280Z and 280ZX.  Wire style clamps like originals.  Two...
New stainless steel injector retainer plate for Datsun 280Z and 280ZX, 1975-83. Exact copy of the originals but...
$11.50
New OEM Genuine Nissan MAF hose clamp. This clamp will fit Datsun 280Z and 280ZX, 1975-83, including Turbo....
$2.79
Fuel injector adaptor connector.  Converts EV1 (square style connector) on the injector to EV6 (smaller with rounded edges)...
Block off plate for the coolant block on top of the throttle body on Datsun 280Z and 280ZX. ...
$89.99
New K&N perforamnce stock replacement air filter for Datsun 280ZX 1981-83 including turbo. Cleanable reusable high flow air...
$71.99
New fuel injector for Datsun 280ZX turbo, 1981-1983. Stock replacement injector, Standard motor products.
New OEM Nissan air cleaner nut for Datsun 280ZX, 1979-83.
New aluminum fitting with black finish.  Adapts M14-1.5 male threads with crush washer to 1/4" NPT (1/4 pipe...
$11.50
5/16" (8.5mm) hose barb to 8AN O-ring fitting. This fitting will work with our aftermarket fuel injection fuel...
Aluminum fitting for adapting a 10AN O-ring boss (ORB) to 5/16", 3/8", 1/2", 5/8" or 3/4" barb.
$2.50
PCV hose for Datsun 280Z 1975 to Aug 1976. This hose goes from the air intake boot in...
New air intake boot for 1979-83 280Z (non turbo).  This boot fits between the air cleaner and the...
$16.50
6AN 90 degree swivel fitting.
TPS sensor adaptor for Datsun 280Z and 280ZX throttle bodies. This adaptor will allow the use of a...
New ported vacuum switch for Datsun 280ZX, 1979-83.  Thread size is 17mm.  Choose from OEM Nissan or aftermarket....
Black anodized fuel pump fitting with 6AN ORB (O-Ring Boss) to 6AN or 8AN male.  This fitting is...
$5.99
1/2 NPT to 5/16 barb adaptor fitting.
Remote idle air control valve fitting for use with EFI. With this setup you can attach a 3/8"...
$3.99
Oversize throttle body gasket for Datsun 280Z and 280ZX, 1975-83. When using a larger than stock throttle body...
$4.00
Weld on oxygen sensor fitting. M18-1.5 threads and 1/2" long.
Aluminum Fiberglass Heat Reflective Adhesive Tape, helps to shield fuel lines, brake lines, wire looms, and more from...
New OEM Nissan air cleaner housing sealing washer for datsun 280ZX, 1979-83, including turbo. This is a metal...
$43.00
Heat shield sleeve with velcro for up to 1/2" tubing, 3 feet long. Thermaflect sleeve can be installed...
1/4" nylon vacuum tubing for use with Prestolok fittings. Sold by the foot. i.e: order qty of 10...
New fuel injector seal for Datsun 280Z and 280ZX, 1975-83. This is the larger of the injector seals,...
These premium (Adel) clamps are made from stainless steel with a high temperature silicone cushion. Adel clamps help...
Reproduction silicone T hose for the intake vacuum lines and Datsun 280ZX, 1980-1983 (non turbo). This hose mounts...
$84.99
Electric fuel pump for Datsun 280Z and 280ZX, 1975-1983, with fuel injection.  Stock replacement pump.  Can handle the...
$111.00
New Bosch oxygen sensor for use with our FAST EFI kit on Datsun 280Z and 280ZX.  The FAST...
Aluminum fitting for 1/2 inch NPT to 6 AN. This fitting will work on our billet EFI fuel...
New stock replacement air filter for Datsun 280ZX 1979-80.
Driven’s Storage Defender Gasoline fuel additive is to be used when vehicles are stored to prevent the damaging...
New wing nut for the air cleaner housing lid on Datsun 280ZX 1979-83. Some housings used two and...
Fuel or vacuum fitting. Choose from 1/8 inch NPT pipe thread male to 1/4" or 5/16" barb.  
New Genuine Nissan BPT (Back Pressure Transducer) valve.  This part mounts on top of the intake near the...
$259.00
New stainless steel fuel return line for 1977-78 Datsun 280Z. Pre bent to factory specs. Made in USA....
Driven Racing  Injector Defender fuel additive utilizes special corrosion inhibitors to prevent costly repairs and poor performance caused...
New stainless steel main fuel line for 1977-78 Datsun 280Z. This is the line that runs from the...
$64.99
New K&N air filter which will fit on 2.75" tubing. Will fit Datsun 280Z and 280ZX with aftermarket...
$14.99
Bracket for holding the tube when converting to a cold air intake filter kit on Datsun 280Z and...
New air cleaner rubber seal for 1975-78 280Z.  Seals the air filter housing lid.
Aluminum fitting for adapting 10AN ORB male thread to 6AN, 8AN or 10AN male flare fitting.
Billet aluminum high flow fuel filter with 10AN ORB ports.  Includes reusable/replaceable 100 micron stainless steel mesh filter...
New air filter for Datsun 280ZX 1981-83 including turbo.  
ALuminum adaptor fitting from 10AN or 8AN ORB male threads to 1/8" or 1/4" NPT female threads.   Choose...
New reproduction startign instructions decal for Datsun 280Z with fuel injection. Measures 3.6" X 1.5".
$11.00
Billet aluminum -6 AN female to 5/16″ straight hose barb fittings are anodized black for corrosion protection and...
New fuel pump damper and bracket for 1975-83 Datsun 280Z and 280ZX.  The stock fuel damper is no...
Replacement fuel pump to body mounting plate for 1975-1983 Datsun 280Z and 280ZX.  This plate is a copy...
New 20# (210cc) fuel injectors for use with aftermarket fuel rail and adaptors on Datsun 280Z and 280ZX....
Fitting for fuel injectors to rail. 1/8 or 3/8 NPT to 5/16 barb.
$11.00
New OEM genuine Nissan fuel injector holder for the top of the injector. This part will fit Datsun...
AN flare connector with 1/8" NPT port for adding a guage or sensor. Available with -4AN, -6AN or...
$7.50

Part #: 800-863

$34.50

Part #: 800-429

$3.50

Part #: 800-943

$109.00

Part #: 650-208

$2.89

Part #: 800-1691

$124.99

Part #: 800-791X

$2.29

Part #: 650-249

$11.50

Part #: 200-810

$2.79

Part #: 800-2044

$5.99

Part #: 650-319

$89.99

Part #: 800-435

$71.99

Part #: 800-1038

$2.79

Part #: 200-1037

$7.99

Part #: 800-1128

$11.50

Part #: 800-1496

$2.50

Part #: 650-222

$89.00

Part #: 800-1281

$16.50

Part #: 800-596

$34.50

Part #: 800-1163

$5.99

Part #: 800-1501

$3.99

Part #: 800-1793

$4.00

Part #: 800-1262

$3.89

Part #: 200-1039

$43.00

Part #: 800-1498

$1.59

Part #: 800-1671

$84.99

Part #: 800-127

$111.00

Part #: 800-1065

$6.00

Part #: 800-1502

Out of stock

Part #: 800-905

$14.99

Part #: 800-1786

$3.99

Part #: 800-1034

$99.00

Part #: 200-1127

$259.00

Part #: 800-500

$13.99

Part #: 800-1771

$299.00

Part #: 800-498

$64.99

Part #: 800-801

$14.99

Part #: 650-354

$26.99

Part #: 800-2443

$19.50

Part #: 800-1750

$11.00

Part #: 800-1840

$4.40

Part #: 800-1514

$11.00

Part #: 200-890

Showing: 65 -128 of 146
Spinner