$3.49
New OEM genuine Nissan plastic screw grommet.  Will work for installing the side markers on 1979-83 280ZX.
NEW OEM genuine Nissan sill plate screw.  Will fit inner or outer door sill scuff plates on 1970-78...
New OEM Nissan screw with special small phillips head.  This screw is used for mounting side markers and...
OEM Nissan phillips head screw used to mount the rear side window latch on Datsun 510 2-door sedan....
OEM Nissan M10 JIS lock nut. This is a small hex head (14mm) with M10-1.25 thread, locking nut....
New OEM Genuine Nissan intake balance tube bolt. This part will fit Datsun 240Z and 260Z, 1970-74.  Attaches...
OEM genuine Nissan M6 bolt.  Choose from 15mm or 20mm thread length.  Hex head with phillips head and...
New OEM Nissan M6 X 35 bolt with washer.  This bolt will work for the timing chain tensioner...
New OEM Nissan 8mm bolt with washer. These bolts are used on the door hinge to door, original...
OEM genuine Nissan M8 hex head JIS bolt.  25mm under head length, 12mm hex.  Various uses on 1970-83...
$65.99
New OEM Genuine Nissan flywheel bolt set of 6 for 1970-1972 Datsun 240Z and 510 cars. These bolts...
M12 lock nut for mounting the rear diff mount to the body on Datsun 510 1968-73.  Choose from...
New OEM stud for Datsun 280ZX turbo exhaust.  This stud is located in the downpipe, 3 per car. ...
New OEM genuine Nissan bolt, Choose from M8, 15 or 25mm thread length.  Same head.  12mm hex.
New OEM Genuine Nissan top strut lock nut. M12 metric 12mm threads. Will fit struts on 1970-78 Datsun...
New OEM pinion adjusting washer for R200 differentials.  See #35 in picture for part location.  Select desired thickness. ...
$0.99
OEM genuine Nissan M6 X 15 screw with lock washer. Listed as the correct screw for Datsun 510...
$5.99
New OEM Nissan ring gear bolt for R200 rear differential. This is a special size high strength bolt...
New OEM Nissan 3-bolt thermostat housing.  Will fit 1975-1983 Datsun 280Z and 280ZX thermostat housings with 3 bolts.  ...
$1.99
New OEM Nissan bolt.  8mm threads, 30mm under head length.  12mm hex head.
Crankshaft balancer bolt that is 15mm longer than stock to be used with some aftermarket balancers, such as...
New OEM M8 bolt for attaching the air cleaner to the carburetor on Datsun 240Z .  8mm with...
$139.00
New set of five OEM Nissan "Turbo" long head bolts. These will fit Datsun 240Z, 260Z, 280Z and...
$2.29
New OEM genuine Nissan carburetor mount stud for Datsun 510, 1968-73. M8-40mm overall length.
$0.79
New OEM Nissan oval head phillips screw.  This screw is for the A-pillar trim on 1977-78 280Z's.  Two...
New OEM front pinion adjusting washer for R180 differentials.  See picture for part location.  Select desired thickness.  Washer...
New OEM Nissan M8 X 20 bolt with hex/phillips head and washers.  This bolt will work for mounting...
$1.49
New OEM genuine Nissan screw size M5 x 10.  This screw is used to retain the inspection light...
New OEM screw grommet in size M5.  Fits in the dash of Datsun Z cars.  Fits square hole...
Starter bolt for all "L" series engines.  We have found that the original starter bolts can be a...
Sale
Bolt M8 x 20 with washers stainless 240Z 260Z 280Z 510
New M8 X 20 bolt with hex head and two washers (10).  Stainless Steel. 13mm hex head.   Set...
$1.69
Genuine Nissan 5mm screw with phillips/hex head.  With flat and lock washer.  Overall length is 11.2mm, flat washer...
$1.99
OEM genuine Nissan M6 screw. Black finish, 20mm thread length. Phillips/with 10mm hex head.  Used in various places...
New OEM genuine Nissan carrier cap bolt for R200 rear differentials. Four bolts required per rear end.
New OEM Nissan bearing spacer for R200 differentials.  See picture for location, #31.  Part is 103mm long.  
New OEM Nissan oil pump regulator kit for Datsun "L" series engine oil pumps.  We believe this is...
New OEM genuine Nissan bolt with washer. This bolt is used for attaching the engine mount insulator to...
New OEM pinion adjusting washer for R200 differentials.  See #34 in picture for part location.  Select desired thickness. ...
$49.99
New OEM Nissan ignition switch for Datsun 510 1970-73.  5-pin connector.  Back of the plug is 29mm diameter.  
New OEM roll pin for R180 or R200 differential lock pin.  Choose from R180 or R200 style.  See...
New OEM Nissan oil cap for Datsun 1200, 510 and roadster with "twist" style cap (not threaded).  Includes...
New OEM Nissan 3-bolt thermostat housing.  Will fit 1975-1979 Datsun 620 truck with L20B engine. 
New OEM Nissan R200 differential side thrust washers.  See #20 in picture for part location.  62mm O.D., 40.5mm...
New OEM main shaft bearing for 4 and 5 speeds in 1970-1983 Z car trans.  Choose from early...
New OEM transmission bearings for Datsun 510 4-speed.  Choose from bearings shown in picture.   A:  Needle bearing, O.D....
$24.99
New OEM Nissan thermostat neck for 1970-73 Datsun 1200.
$3.99
OEM Nissan M12-1.25 X 75 bolt .  "7" in the head.   Measures 75mm from base of head to...
$3.49

Part #: 200-935

$1.99

Part #: 200-946

$1.69

Part #: 200-799

$2.00

Part #: 200-1013

$2.29

Part #: 200-1072

$1.99

Part #: 200-951

$65.99

Part #: 200-556 x6

$5.59

Part #: 200-1066

$1.99

Part #: 200-816

$0.99

Part #: 200-1097

$5.99

Part #: 200-878

$39.99

Part #: 200-1232

$1.99

Part #: 200-1095

$15.99

Part #: 800-1984

$1.89

Part #: 200-1099

$139.00

Part #: 200-852

$2.29

Part #: 200-930

$0.79

Part #: 200-1142

$4.49

Part #: 200-1075

$1.49

Part #: 200-1094

$8.99

Part #: 200-1051

Sale
$11.99$8.99

Part #: 800-2123X

$1.69

Part #: 200-1138

$1.99

Part #: 200-1150

$8.50

Part #: 200-1016

$19.99

Part #: 200-1229

$14.99

Part #: 200-1275

$2.19

Part #: 200-1025

$49.99

Part #: 200-1276

$24.99

Part #: 200-1260

$39.99

Part #: 200-1232

$24.99

Part #:

$3.99

Part #: 200-756X

Showing: 65 -111 of 111
Spinner