$22.99
Final inspection "OK" sticker for 1970-80 Z cars.  3" wide X 1.5" tall.
$2.99
1" silicone hose to attach to the engine block vent pipe on L series engines.  3" length.
$5.99
1/2 NPT to 5/16 barb adaptor fitting.
Aluminum fitting for 1/2 inch NPT to 6 AN. This fitting will work on our billet EFI fuel...
1/4" hard line for brake aor fuel lines.  Choose from 10' copper/nickel or 25' galvenized steel.
New black aluminum adaptor fitting.  1/4" NPT Male to M12-1.5 female.  
Reducer from 1/8 male NPT to 1/2 female NPT. Pipe thread.
Five pack of fuses for Datsun 280ZX 1979-83.  Choose from 10A, 15A or 20A....packs of 5.   Quantities used...
Five pack of fuses for Datsun 240Z, 260Z, and 280Z, 1970-78. The 10 and 20 amp are the...
ALuminum adaptor fitting from 10AN or 8AN ORB male threads to 1/8" or 1/4" NPT female threads.   Choose...
Aluminum fitting for adapting a 10AN O-ring boss (ORB) to 5/16", 3/8", 1/2", 5/8" or 3/4" barb.
Aluminum fitting for adapting 10AN ORB male thread to 6AN, 8AN or 10AN male flare fitting.
10AN , 90 degree with female 10AN end.    Choose from push lock style or threaded style: -Push...
$9.89
M10-1.25 thread die.  Made in USA.
New 10mm hex socket with 3/8" drive. This is the correct size tool for the cylinder head bolts...
$1.99
10mm socket with 1/4" drive.  This is the one you lost and if you spend $50.00 or more...
$12.00
New 12V power outlet/lighter. Includes mounting bracket & wiring. Can be mounted anywhere inside the car for 12V...
$23.99
New Energy Suspension black poly bushing set for 15mm diameter sway bar.  Includes end link bushings.
$53.99
New OEM genuine Nissan motor mount for Datsun 1600 and 2000 Roadster, 1965-70.
$10.00
Valve cover gasket for Datsun 1600 roadster, 1966-70.
$14.50
New Energy Suspension 16mm black polyurethane sway bar bushings for 1970-83 Datsun 240Z/260Z/280Z.280ZX. Will fit front or rear...
New Pair of Energy Suspension polyurethane sway bar bushings with metal brackets.   Choose from 18mm or 19mm (bar...
New Energy Suspension 18mm polyurethane sway bar bushings for 1970-83 Datsun 240Z/260Z/280Z.280ZX. Will fit front or rear bars....
$12.00
New Energy Suspension black polyurethane sway bar bushings for 1970-83 Datsun 240Z 260Z 280Z 280ZX. Will fit front...
$23.99
22mm (7/8") polyurethane sway bar bushing set with greasable metal brackets. Will fit aftermarket sway bars.
Energy suspension 22mm (7/8") polyurethane sway bar bushing pair. These will fit aftermarket sway bars front or rear....
New front sway bar bushing for Datsun 280ZX turbo.  Size 23mm.   Choose from poly or rubber bushing only,...
 "240Z" roof emblem. This emblem will fit Datsun 240Z 1970-1971, series one Z cars.    Choose from OEM...
Datsun logo t-shirt in black. Logos on the front, back and sleeve.
New pair of 240Z series 1 hatch grills.  Choose from OEM Nissan or aftermarket.  Grills do not include...
$21.99
New Energy Suspesnion 24mm polyurethane sway bar bushing pair with metal bracket.
New Energy Suspension sway bar bushing pair in 25mm or 1". These bushings will fit front or rear...
New Energy Suspension sway bar bushing pair in 28mm. These bushings will fit front or rear of Datsun...
 These brake lines are 3/16" with 10mm metric fittings which will work with your Datsun metric fittings.  These...
This part will connect 3/16" steel brake lines with 10mm or 3/8" threaded fittings together. The 10mm will...
3M soft non-hardening caulking material in one foot lengths for use in all types of seams, joints and...
$16.99
3M Super Weatherstrip & Gasket Adhesive, 5 oz tube, black. Great for attaching most anything to your car....
AN flare connector with 1/8" NPT port for adding a guage or sensor. Available with -4AN, -6AN or...
$29.99
New reproduction "5 speed" emblem for Datsun. Overall width of 4". Nice quality with self adhesive backing. 
$15.99
New OEM Nissan bearing for 280Z and 280ZX (5 Speed-Fs5W71B) transmission.  Shown in the diagram as #56, yellow...
New OEM Nissan bearing for 280Z and 280ZX (5 Speed-Fs5W71B) transmission.  Shown in the diagram as #22, orange...
New main shaft bearing input or output for 5-Speed manual transmission. Datsun 280Z / 280ZX 1977-80. Bore= .1.178",...
New OEM Nissan needle bearing for 280Z and 280ZX (5 Speed-Fs5W71B) transmission.  Shown in the diagram with 3...
$11.00
Billet aluminum -6 AN female to 5/16″ straight hose barb fittings are anodized black for corrosion protection and...
$4.99
Brass fitting with 5/16" barb to 3/8" pipe thread (NPT).
Aluminum 5/8" barb connector. Great for making custom heater hoses or for fuel tank vent hoses
$0.89
New stainless steel screw for the hatch venst on Datsun 510 -1968-73.  Stainless steel phillips head screw, 19mm...
$3.49
New stainless steel hardware for the rear seat release cover on Datsun 510 Wagon, 1968-73.  Includes 4 SS...
$0.79
New screw for the rear seat swivel bracket on Datsun 510 wagon 1968-73.  This is the same size...
$9.00
6AN to 6AN female swivel connector.
Certified for use with racing fuels, ethanol-based fuels (E85+), diesels/bio-diesels, methanol, and ethanol/gasoline mixtures. This hose will not...
O-ring port plug for 6AN or 8AN size. Includes O-ring.  ORB fitting.
$16.50
6AN 90 degree swivel fitting.
6An swivel hose ends. These fittings are for use with high pressure braided AN hose and are twist...
6 AN male O-ring adaptor fitting to 5/16" or 3/8" hose barb. Black color. This fitting will work...
$10.00
90 degree fitting from 6AN male to 1/4 NPT male threads.
$2.00
New OEM genuine Nissan 8mm stud.   45mm overall length.  
New A/C condensor.  Measures 21 5/8" total width and 12" tall.  This is the condensor found in our...
New A/C Receiver Drier / Accumulator for Datsun 280ZX, 1979-81.  
$14.99
New OEM Nissan rubber plug for A/C lines on the firewall.  This will plug the air conditioning lines...
New OEM genuine Nissan cylinder head bolt for Datsun 1200 A12 engines, 1970-73. The A12 used 9 short...
$39.99
New OEM Nissan manifold gasket for A12 engines with round ports.
New OEM Genuine Nissan brand accelerator pedal pad. This gas pedal cover will fit 1970-89 Datsun and Nissan...
New OEM "E" clip for the accelerator pedal shaft. This clip mounts on the end of the accelerator...
$22.99

Part #: 800-2432

$2.99

Part #: 800-283

$5.99

Part #: 800-1501

$6.00

Part #: 800-1502

$6.99

Part #: 800-1998

$10.00

Part #: 800-1715

$9.89

Part #: 800-647

$6.99

Part #: 800-828

$1.99

Part #: 800-859X

$12.00

Part #: 800-326

$23.99

Part #: 800-1994

$53.99

Part #: 200-1020

$10.00

Part #: 800-1615

$14.50

Part #: 800-170

$24.99

Part #: 800-083X

$12.00

Part #: 800-171

$23.99

Part #: 800-1052

$25.99

Part #: 100-002-L

$21.99

Part #: 800-449

$23.99

Part #: 800-620

$8.59

Part #: 800-2242

$16.99

Part #: 800-237

$29.99

Part #: 800-1023

$15.99

Part #: 200-1199

$36.99

Part #: 200-1200

$41.00

Part #: 800-343

$14.99

Part #: 200-1198

$11.00

Part #: 800-1840

$4.99

Part #: 800-1129

$11.99

Part #: 800-1133

$0.89

Part #: 800-2176

$3.49

Part #: 650-412

$0.79

Part #: 800-703

$9.00

Part #: 800-1513

$4.50

Part #: 800-224

$16.50

Part #: 800-596

$10.00

Part #: 800-1709

$2.00

Part #: 200-859

$85.00

Part #: 800-2594

$29.00

Part #: 800-1090

$14.99

Part #: 200-665

$39.99

Part #: 200-1130

$1.79

Part #: 200-713

Showing: 1 -64 of 2842
Spinner