280ZX
New rocker arm screw lock nut. Cylinder head rocker pivot lock nut will fit Datsun 240Z, 260Z, 280Z,...
Crankshaft balancer bolt that is 15mm longer than stock to be used with some aftermarket balancers, such as...
New billet aluminum solid rear differential mount for 1979-83 Datsun 280ZX.  Replaces the original rubber mount.  The factory...
New radiator cap with sacrificial anode.  Choose from 13# or 16# cap.  Will fit datsun 240Z, 260Z, 280Z,...
New reproduction stainless steel distributor base plate.  Same thickness and design as originals.  Choose from different styles for...
New custom "L"series oil funnel.  Choose from red, black or blue. Threaded to suit the OEM rocker cover...
New stock replacement rubber brake hose kit for 280ZX.  Choose from 1979-81 style (4-pcs) or 1982-83 style (6-pcs). ...
New black acorn style lug nuts with thread size of M12-1.25.  Fits stock datsun thread size.   Sold individually....
$20.99
New Genuine NIssan engine oil cap for Datsun 240Z, 260Z, 280Z, 280ZX 1970-83. Also fits 510 1970-73.  Fits...
Easy Loom delivers superior protection for exposed wires, cables, and hoses. Mesh design protects wires or hoses from...
New OEM Nissan wiper linkage cup for Datsun 280ZX, 1979-83.  Plastic cup that connects the wiper arm linkage...
OEM Genuine Nissan R200 axle bearing. Will fit right or left axle. This bearing works in R200 differentials...
Adaptor for the coolant temperature sensor on 1970-1983 "L" series engines.  This is an uncommon M16 thread size. ...
New OEM Nissan fuel clamp for 5/16" (8mm) fuel hose  This style of clamp is used on the...
New silicone radiator hose 2-piece set for upper and lower hoses on 1979-83 Datsun 280ZX.  Choose from Black,...
$48.99
New OEM "Nissan" rear emblem.  4" long.
Differential bearing for R200 pinion gear. This is the front bearing (see #31) on the pinion gear. The...
New OEM Genuine Nissan heater control valve for cars with automatic climate control. WIll fit Datsun 280ZX 1979-83....
New 12mm copper crush washer. Can be used with any 12mm fitting. The 280ZX turbo stock banjo bolt...
New OEM Nissan lower alternator mount.  Mounts the lower part of the alternator to the engine block.  Fits...
New set of Ross Racing forged flat top pistons for 87mm bore.  Set of 6 pistons with pins...
New aluminum timing cover plate with gasket and stainless steel allen head bolts. Goes on the front of...
New HKT made in japan temperature sensor. Will fit Datsun 240Z, 260Z and 280Z, 1970-78 . This sensor...
New transmission rebuild kit for Datsun 280ZX Turbo T5, 1982-83. Includes Koyo (Japan and USA) bearings, seals, shims...
$5.50
Set of silicone hose clamps for PT# 800-925 silicone PCV hose for Datsun 280Z and 280ZX. These clamps...
$69.99
New heater blower motor for Datsun 280ZX, 1979-80.
Rubber plug for deleting the rear wiper motor or the upper wsher nozzle on Datsun 280ZX.  This is...
Bullet connector with wire lead.  Choose from male or female connector. *See PT# 800-521 for terminal only.
$21.99
New heater inlet hose fro 1979-83 Datsun 280ZX.  This hose routes on the RH side of the block...
3M soft non-hardening caulking material in one foot lengths for use in all types of seams, joints and...
New set of engine connecting rod bearings for 1970-83 Datsun 240Z, 260Z, 280Z and 280ZX. Will fit Nissan...
New triple gauge set with mounting bracket and accessories.  Includes 2 5/8" gauges.  Oil Pressure (mechanical), water temp...
New Genuine Nissan OEM heater hose connector for Datsun 280ZX, 1979-83. This is the 3-way pressure regulator valve...
New 280ZX hatch emblem. Self adhesive backing. Will fit Datsun 280ZX, 1979-83.
$139.00
New set of five OEM Nissan "Turbo" long head bolts. These will fit Datsun 240Z, 260Z, 280Z and...
New cam gear for all "L" series Nissan engines 1968-1983.
New castle nut.  Choose from 10mm, 12mm or 14mm thread.  These castle nuts are used on tie rods...
New OEM Nissan brake master cylinder cap set with fluid level sensors.  Fits 1979-83 Datsun 280ZX.
New axle bolt kit for holding the stub axle into the differential on R160 and R180 differentials.  Includes...
$5.99
New OEM Nissan rubber plug for the upper inside of the rear hatch on Datsun 280ZX 1979-83.  Fits...
$25.50
New inner tie rod for Datsun 280ZX 79-83 and 300ZX 84-89 with rack and pinion steering. This is...
Out of stock
New idler arm for Datsun 280ZX, 1979-81.
New set of 12 "short" valve stem seals for Datsun "L" series engines, 240Z, 260Z, 280Z and 280ZX. ...
New fuel pump damper and bracket for 1975-83 Datsun 280Z and 280ZX.  The stock fuel damper is no...
New inner fender liner clip for Datsun 280ZX, 1979-83.  Holds the inner fender liner to the fender.  Choose...
New OEM genuine Nissan pinion spacer for R200 differential.  Choose from different lengths.
Steel ring for welding onto the strut tube when installing adjustable coil over sleeves.  Two sizes available: Size...
$26.99
New OEM genuine Nissan rear suspension stopper for Datsun 280ZX, 1979-83.  Steel plate with rubber attached.
New aftermarket brake pedal pad for automatic transmission equipped cars. Will fit Datsun 240Z, 260Z, 280Z and 280ZX,...
New reproduction wheel center cap for the 4-spoke wheels on Datsun 280ZX factory wheels. The outside diameter of...
New OEM genuine Nissan  transmission bearing for 1971-1983 240Z, 260Z, 280Z and 280ZX (not turbo). Bearings are for...
$142.00
New OEM Genuine Nissan plastic fan blade for Datsun 280ZX, 1979-83.  This fan looks the same as the...
New K&N high performance oil filter for Datsun 240Z thru 280ZX 1970-83. K&N Oil Filters provide outstanding filtration...
Universal O-ring kit for servicing the A/C system.  Various sizes compatible with all refrigerants.
New OEM Nissan wiring harness protection tape.  Abrasion resistant tape (self adhesive backing) with a thin layer of...
$219.00
New Magnaflow catalytic converter for 1978-83 280Z and 280ZX.  Maganflow claims this is a direct fit converter.  Includes...
$95.00
New pair of Wilwood front disc brake conversion brackets for Datsun 510 68-73.   Allows the use of Wilwood...
New OEM screw grommet in size M5.  Fits in the dash of Datsun Z cars.  Fits square hole...
$49.99
Voltage regulator for Datsun 280z and 280ZX, 1978-83. This regulator installs in the alternator for internal regulator alternators....
$11.00
New OEM genuine Nissan fuel injector holder for the top of the injector. This part will fit Datsun...
New OEM genuine Nissan automatic transmission dipstick tube O ring seal. This seal will work on all automatic...
New OEM Genuine Nissan plastic fan blade.  This fan blade has applications for later Nissan products but works...
New shift boot lever rubber seal for Datsun 280ZX turbo and 300ZX Turbo, 1981-1986. This seal fits where...
New hatch strut ball/stud. This part will screw into the hatch for the support strut. Will fit Datsun...
$15.99

Part #: 800-1984

$52.99

Part #: 800-2501

$0.99

Part #: 800-893

$20.99

Part #: 200-1159

$59.99

Part #: 200-880

$5.79

Part #: 200-1196

$48.99

Part #: 200-929

$49.99

Part #: 800-1087

$64.99

Part #: 200-1186

$1,059.00

Part #: 800-2224

$11.99

Part #: 800-1798

$5.50

Part #: 650-195

$69.99

Part #: 800-898

$21.99

Part #: 800-486

$8.99

Part #: 800-2242

Out of stock

Part #: 800-382

$139.00

Part #: 200-852

$26.50

Part #: 800-1160

$149.00

Part #: 200-1178

$5.99

Part #: 200-1146

$25.50

Part #: 800-955

Out of stock

Part #: 800-849

$25.99

Part #: 800-1016

$26.99

Part #: 200-1042

$6.00

Part #: 800-1416

$142.00

Part #: 200-875X

$13.99

Part #: 800-1972

$16.99

Part #: 800-2215

$219.00

Part #: 800-2387

$95.00

Part #: 800-1000X

$8.99

Part #: 200-1051

$49.99

Part #: 800-1282

$11.00

Part #: 200-890

$4.50

Part #: 200-1011

$79.00

Part #: 200-1265

$7.00

Part #: 800-1186

Showing: 577 -640 of 753
Spinner