Rubber plug for deleting the rear wiper motor or the upper wsher nozzle on Datsun 280ZX.  This is...
ST Suspension anti sway bar set for 1979-83 Datsun 280ZX.  Includes front 1 1/8" sway bar with all...
DEI boom mat (50224) 24"X 12.5" and 4mm thick, piece of self adhesive sound and heat barrier for...
$3.59
New OEM Nissan rubber plug.  Application is for 280ZX firewall plug, but may fit other locations.   Fits approx...
New grease zerk fitting for lubing ball joints, tie rods, u-joints, etc.  6mm thread which is what most...
New aluminum oil filter adaptor for adding an oil cooler.  Fits all "L" series engines from Nissan.  The...
$119.99
New OEM Genuine Nissan (made in japan)  front wheel bearing replacement kit for right or left sides on...
New OEM Nissan transmission shim. Mounts on reverse gear shaft.   Choose from different thicknesses.  Shim is 55.5mm O.D.,...
Reground OEM Genuine Nissan rocker arm for Datsun L series engines 240Z, 260Z, 280Z, 280ZX, 510.  This rocker...
OEM genuine Nissan banjo bolt for the turbo oiling. Will fit Datsun 280ZX turbo, 1981-83. Size M12.
New OEM genuine Nissan front pinion bearing for R200 differentials. *See # 31 in the diagram for part...
Datsun 280ZX front brakes. New OEM Genuine Nissan front brake pads for 1979-83 Datsun 280ZX.
New pair of OEM Koito 7" headlights with glass housings and H4 or LED bulbs. These headlights will...
New fuel pump damper and bracket for 1975-83 Datsun 280Z and 280ZX.  The stock fuel damper is no...
$25.99
Custom aluminum heat shield for stock intake manifolds on 1975-83 280Z and 280ZX.  .080" aluminum with bolts to...
$73.99
Electric fuel pump for Datsun 280Z and 280ZX, 1975-1983, with fuel injection.  Stock replacement pump.  Can handle the...
Replacement fuel pump to body mounting plate for 1975-1983 Datsun 280Z and 280ZX.  This plate is a copy...
OEM part for protecting the paint under hood, door or trunk bumper stops.  This is a clear adhesive...
POR 15 brake caliper paint in red or black.  Choose from the kit or single 8oz cans.  The...
Fidanza friction kit for aluminum flywheel for Datsun 240Z, 260Z, 280Z and 280ZX, 1970-83.   Replaces the wear ring...
$5.59
New OEM Nissan headlight adjuster spring for 1979-83 280ZX.  
New OEM Nissan fuel clamp for 5/16" (8mm) fuel hose  This style of clamp is used on the...
Fuel injector signal test tool.  This tool will allow you to see if your injectors are getting a...
New taillight nut for Datsun 280ZX 1979-83.   6 per tail light, sold individually.  M5 nut with built in...
(1) New OEM Nissan interior clip for the rear interior hatch panel on 1979-83 280ZX.   8 required to...
New (longer than stock) driveshaft to differential bolt kit for use with new style flanges on the R180...
$4.89
New OEM Nissan inner fender liner clip for Datsun 280ZX, 1979-83.  Holds the inner fender liner to the...
New Derale oil filter relocation kit for Nissan "L" series engines 1969-1983.  Includes all fittings, instructions and 10...
New Earls billet aluminum oil filter adaptor for adding a remote oil filter.  Fits all "L" series engines...
One male bullet connector. *See PT# 800-1317 for connector with pigtail wire.  *See PT# 800-522 for terminal only
$189.00
New OEM Nissan oil temp sensor for 280ZX and Turbo.  This sensor is located next to the oil...
Sale
Kameari L-Type Chrome Head Front Cover L6 240Z 260Z 280Z 280ZX
New Kameari chrome head inspection plate.  Will fit all "L" series engines at the front of the cylinder...
New set of 3 door hinge mounting screws with washers for 1979-83 Datsun 280ZX.  Stock replacement phillips heads...
Sale
Aluminum Radiator 2 Row 280ZX 79-83
New aluminum 2-row radiator for Datsun 280ZX 1979-83.  This is a stock replacement radiator with no mods required...
New OEM 5th gear bushing for Datsun 280Z and 280ZX 5-speed transmission, FS5W71B.  34mm length, 32mm O.D.  See...
$399.00
Components needed for installing an aftermarket EFI kit on your Datsun 280Z/280ZX.   Inlcludes: IAC valve and fixture TPS...
New OEM roll pin for transmission control levers, fork rods.  Two sizes. A;  25.4mm length, 4.2mm diameter (1975-76...
Two rod bolt covers for installing piston/rod assemblies.  These boots keep the rod bolts from scratching the crank...
New OEM Nissan bearing for 280Z and 280ZX (5 Speed-Fs5W71B) transmission.  Shown in the diagram as #22, orange...
$15.99
New OEM Nissan bearing for 280Z and 280ZX (5 Speed-Fs5W71B) transmission.  Shown in the diagram as #56, yellow...
New stainless steel screw for use on the fuel sending unit inspection plate located in the hatch area...
$4.89
New OEM Nissan Idler arm bushing for Datsun 280ZX 1979-81.  Two bushings required per idler arm.  Sold individually....
New door panel hardware for Datsun 280ZX.   Choose form screw or speed nut. M6 size.
DEI boom mat sound barrier "headliner".  Universal fit self adhesive with black textured "vinyl look" finish in 1/2"...
New battery cable clamp bolt and nut.  Square head, 5/16"
SPEC aluminum flywheel for Datsun 240Z, 260Z, 280Z and 280ZX, 1970-83.  This flywheel will work with clutches for...
Out of stock

Part #: 800-1952

$21.99

Part #: 800-1890

$3.59

Part #: 200-777X

$0.89

Part #: 800-1412

$69.00

Part #: 800-1333

$119.99

Part #: 650-393

$35.99

Part #: 800-1142X

$119.99

Part #: 200-876

Out of stock

Part #: 200-752

$25.99

Part #: 650-456

$73.99

Part #: 800-127

$89.00

Part #: 800-159

$5.59

Part #: 200-445X

$3.59

Part #: 200-1196

$1.89

Part #: 650-369X

$4.89

Part #: 200-1188

$68.00

Part #: 800-1342

$83.00

Part #: 800-1171

$0.79

Part #: 800-391

$189.00

Part #: 200-1176

Sale
$34.99$29.99

Part #: 800-2503

$4.99

Part #: 650-396

Sale
Out of stock

Part #: RAD-2167-2

$26.99

Part #: 200-1214

$399.00

Part #: 650-462

$36.99

Part #: 200-1200

$15.99

Part #: 200-1199

$2.99

Part #: 800-1923

$4.89

Part #: 200-1187

$1.49

Part #: 650-371

$459.00

Part #: 800-484X

Showing: 641 -686 of 686
Spinner