New OEM Nissan O ring for the transmission shifter slider (striking guide).  Will fit late 1971-1983 4 and...
$19.99
New OEM genuine Nissan rear control arm bushing for Datsun 280ZX, 1979-83. These bushings connect the control arm...
New rocker arm screw lock nut. Cylinder head lock nut will fit Datsun 240Z, 260Z, 280Z, 280ZX and...
New Genuine Nissan BPT (Back Pressure Transducer) valve.  This part mounts on top of the intake near the...
New radiator cap with sacrificial anode.  Choose from 13# or 16# cap.  Will fit datsun 240Z, 260Z, 280Z,...
Differential bearing for R200 pinion gear. This is the front bearing (see #31) on the pinion gear. The...
New OEM Genuine Nissan heater control valve for cars with automatic climate control. WIll fit Datsun 280ZX 1979-83....
$5.50
Set of silicone hose clamps for PT# 800-925 silicone PCV hose for Datsun 280Z and 280ZX. These clamps...
Hood prop rod grommet for Datsun 280ZX, 1979-83. Holds the hood rod into the radiator support.  Choose from...
New interior trim clip for Datsun 280ZX.   Replaces clips on the plastic trim in the rear door jamb. ...
NEW Remflex exhaust manifold gasket for Datsun 280Z and 280ZX 1975-1983 (non turbo). This gasket goes in between...
New OEM Nissan wiper linkage cup for Datsun 280ZX, 1979-83.  Plastic cup that connects the wiper arm linkage...
New set of engine connecting rod bearings for 1970-83 Datsun 240Z, 260Z, 280Z and 280ZX. Will fit Nissan...
New triple gauge set with mounting bracket and accessories.  Includes 2 5/8" gauges.  Oil Pressure (mechanical), water temp...
New transmission rebuild kit for Datsun 280ZX Turbo T5, 1982-83. Includes Koyo (Japan and USA) bearings, seals, shims...
New Genuine Nissan OEM heater hose connector for Datsun 280ZX, 1979-83. This is the 3-way pressure regulator valve...
New 280ZX hatch emblem. Self adhesive backing. Will fit Datsun 280ZX, 1979-83.
$139.00
New set of five OEM Nissan "Turbo" long head bolts. These will fit Datsun 240Z, 260Z, 280Z and...
New rear output shaft oil seal for T5 5-Speed manual transmissions found in 1982-83 280ZX Turbo's.  Choose from...
$48.99
New OEM "Nissan" rear emblem.  4" long.
New OEM lug nut for Datsun cars with M12 studs.  This is a genuine Nissan 240Z, 260Z and...
Out of stock
New idler arm for Datsun 280ZX, 1979-81.
New 12mm copper crush washer. Can be used with any 12mm fitting. The 280ZX turbo stock banjo bolt...
Bullet style wire connector terminals as used on several components on Z cars and 510 1968-83.  Choose from...
$7.99
New door switch for Datsun 280ZX, 1979-83.  Will fit right or left side.   *See PT# 800-1226 for the...
Camshaft mount shim set for Datsun 240Z, 260Z, 280Z and 280ZX, 1970-1983. These shims are .075" thickness. Cam...
Easy Loom delivers superior protection for exposed wires, cables, and hoses. Mesh design protects wires or hoses from...
Zinc anode for reducing corrosion in the cooling system.  This brass fitting has 1/4" NPT threads with a...
New OEM stud for Datsun 280ZX turbo exhaust.  This stud is located in the downpipe, 3 per car. ...
OEM Genuine Nissan R200 axle bearing. Will fit right or left axle. This bearing works in R200 differentials...
$64.00
New heater blower motor for Datsun 280ZX, 1979-80.
New reproduction wheel center cap for the 4-spoke wheels on Datsun 280ZX factory wheels. The outside diameter of...
New A/C pressure switch for 1979-83 Datsun 280ZX.  Two pin switch.
New billet aluminum solid rear differential mount for 1979-83 Datsun 280ZX.  Replaces the original rubber mount.  The factory...
New power brake booster rebuild kit for Datsun 280Z (2+2)/280ZX with 10 inch booster. New rubber parts and...
New coil spring pair for front or rear of Datsun 280ZX, 1979-83.  Choose from front pair or rear...
New aluminum timing cover plate with gasket and stainless steel allen head bolts. Goes on the front of...
$14.99
Bracket for holding the tube when converting to a cold air intake filter kit on Datsun 280Z and...
$14.99
New Genuine NIssan engine oil cap for Datsun 240Z, 260Z, 280Z, 280ZX 1970-83. Also fits 510 1970-73.  Fits...
New transmission guide stop pin or clip for Datsun Z car transmissions 1972-1983.  Choose from guide pin or...
$95.00
New pair of Wilwood front disc brake conversion brackets for Datsun 510 68-73.   Allows the use of Wilwood...
Steel ring for welding onto the strut tube when installing adjustable coil over sleeves.  Two sizes available: Size...
New OEM screw grommet in size M5.  Fits in the dash of Datsun Z cars.  Fits square hole...
$49.99
Voltage regulator for Datsun 280z and 280ZX, 1978-83. This regulator installs in the alternator for internal regulator alternators....
$25.50
New inner tie rod for Datsun 280ZX 79-83 and 300ZX 84-89 with rack and pinion steering. This is...
New hatch strut ball/stud. This part will screw into the hatch for the support strut. Will fit Datsun...
New OEM genuine Nissan "Turbo" head gasket. This gasket is designated for L28 turbo only because of the...
$26.50
New cam gear for all "L" series Nissan engines 1968-1983.
New OEM genuine Nissan automatic transmission dipstick tube O ring seal. This seal will work on all automatic...
New OEM Nissan battery hold down bracket kit for 280ZX 1979-83 turbo and non-turbo.  Includes top hold down...
New air filter for Datsun 280ZX 1981-83 including turbo.  
$16.99
New OEM Nissan speedo pinion gear housing with O-ring.  Works on 280ZX 5-speed transmissions.
New ARP racing valve cover bolt set for L6 or L4 engines.  Stainless steel with 6-point head and...
$219.00
New Magnaflow catalytic converter for 1978-83 280Z and 280ZX.  Maganflow claims this is a direct fit converter.  Includes...
$15.50
Datsun 280Z & 280ZX timing chain guide. New timing chain guide for Datsun 280Z-280ZX 1975-83. This guide is...
New aftermarket brake pedal pad for automatic transmission equipped cars. Will fit Datsun 240Z, 260Z, 280Z and 280ZX,...
New main shaft bearing input or output for 5-Speed manual transmission. Datsun 280Z / 280ZX 1977-80. Bore= .1.178",...
New set of Ross Racing forged flat top pistons for 87mm bore.  Set of 6 pistons with pins...
3M soft non-hardening caulking material in one foot lengths for use in all types of seams, joints and...
New HKT made in japan temperature sensor. Will fit Datsun 240Z, 260Z and 280Z, 1970-78 . This sensor...
New OEM genuine Nissan pinion spacer for R200 differential.  Choose from different lengths.
New shift boot lever rubber seal for Datsun 280ZX turbo and 300ZX Turbo, 1981-1986. This seal fits where...
New 50mm freeze plug. Steel expansion plug that installs on the back side of the engine block. Will...
New OEM Nissan brake master cylinder cap set with fluid level sensors.  Fits 1979-83 Datsun 280ZX.
$3.19

Part #: 200-667

$19.99

Part #: 200-960

$99.00

Part #: 200-1127

$49.99

Part #: 800-1087

$5.50

Part #: 650-195

$1.89

Part #: 800-1824

$21.99

Part #: 800-180

$269.00

Part #: 800-825X

Out of stock

Part #: 800-382

$139.00

Part #: 200-852

$48.99

Part #: 200-929

$3.89

Part #: 200-1061

Out of stock

Part #: 800-849

$7.99

Part #: 800-2029

$48.00

Part #: 650-402

$4.89

Part #: 200-1066

$51.99

Part #: 200-880

$64.00

Part #: 800-898

$4.99

Part #: 800-287

$52.99

Part #: 800-2501

$14.99

Part #: 650-354

$14.99

Part #: 200-1159

$95.00

Part #: 800-1000X

$8.99

Part #: 200-1051

$49.99

Part #: 800-1282

$25.50

Part #: 800-955

$26.50

Part #: 800-1160

$4.50

Part #: 200-1011

$39.99

Part #: 650-437

$16.99

Part #: 200-1170

$219.00

Part #: 800-2387

$15.50

Part #: 800-212

$6.00

Part #: 800-1416

$41.00

Part #: 800-343

$899.00

Part #: 800-2224

$8.59

Part #: 800-2242

$11.99

Part #: 800-1798

$7.00

Part #: 800-1186

$2.00

Part #: 800-642

$99.00

Part #: 200-1178

Showing: 513 -576 of 685
Spinner